|
Order no |
|
|
EMD-1500-311 |
EGH-1019 |
Probe, 90°, 10 µm radius, PMD-90101
Certified Specimen, incl. Test Certificate |
EMD-1500-312 |
EGH-1019 |
Probe, 90°, 10 µm radius, EMD-90010
Precision Specimen |
EMD-1500-321 |
EGH-1026 |
Probe , 90°, 5 µm radius, PMD-90101,
Certified Specimen, incl. Test Certificate |
EMD-1500-322 |
EGH-1026 |
Probe, 90°, 5 µm radius, EMD-90010
Precision Specimen |
|
|
General Purpose Probes
EGH-1019/EGH-1026
For most surface roughness applications.
EGH-1026
With a 90° conical diamond stylus, 5 µm/ .0002“ radius*.
EGH-1019
With a 90° conical diamond stylus, 10 µm/ .0004“ radius |
|
Transverse Chisel Prob
EGH-1020-W1
For gaging sharp edges or small O.D.’s where probe is aligned with (in 180° or closed position) to axis of traverse. 90° sapphire chisel, 10 µm./ .0004“ radius. |
|
Parallel Chisel Probe
EGH-1020-W2
For gaging sharp edges or small O.D.’s where probe is perpendicular (in 90°- or 270° position) to axis of traverse. 90° sapphire chisel, 10 µm. / .0004“ radius. Also used with EAS-2421 Vee
fixture for O.D.’s smaller than 6,35 mm, / .25“. |
|
Small Bore Prob
EGH-1021/EGH-1027
For gaging small bores (3,2 mm/ .125“ minimum I.D.) up to a depth of 19 mm/ .75“.
EGH-1027
With a 90° conical diamond stylus, 5 µm/ .0002“ radius*.
EGH-1021
With a 90° conical diamond stylus, 10 µm/ .0004“ radius |
|
Groove Bottom Probe
EGH-1028
For measuring the bottom of grooves, recesses and small holes to depths of 6.35 mm/ .25“.
Also used for short lands and shoulders.
With 90° conical diamond stylus, 10 µm/ .0004“ radius.
NOTE: Small Bore and Groove Bottom Probes can only be used in 180° position with the Pocket Surf unit supported in a height stand or other fixture. |
|
|
|
|
|